 |
|
|
|
. |
|
|
. |
|
|
. |
|
|
. |
|
|
. |
|
|
. |
|
|
. |
|
|
Make a Payment |
Copyright 2004 Simmons (Mouldings) Ltd.
All rights reserved
Revised 25/01/2006
|
Sinks - Drop-In |
|||
|
|
Drop-in sinks have a gloss finish to the top of the sink flange and feature a smooth radius to the top inside corner. They are designed to fit flush into a rebated cut out in a worktop, and be sealed in place with silicone sealant or Epoxy Resin grout. These
sinks are designed for use with any worktop material, but are particularly
suitable for use with laminate worktops. They are fitted through the
worktop from above and therefore cover the core material of the laminate
which would otherwise be exposed. The
base of the sink slopes to a hole rebated to accept a waste fitting.
Sinks can also be drilled to accept an overflow fitting. Simmons
can supply sinks complete with a Vulcathene waste and overflow if
requested. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
