Simmons Epoxy Resin Laboratory Sinks


	Simmons Introduction Resin Systems Material Specification Contact Us .
	Worktops Work top Profiles .
	Sinktops Double Drainer Single Drainer Special Fabrications Drop-on .
	Sinks Overhang Drop-on Drop-in Special Sinks .
	Edging Edging Profiles .
	Fume Cupboard Bases Standard Bases Fabricated Bases & liners .
	Installation Links .

Make a Payment

Revised 25/01/2006

Header

Overhang Sinks

Sinks - Overhang (Underslung)

Simmons standard range of sinks and troughs are moulded complete with a fixing flange in order to simplify fitment and to optimise the integrity of the joint with the worktop.

An overhang (underslung) sink is bonded and screwed to the underside of a worktop with the worktop slightly overhanging the sink opening. This type of fitment is also commonly referred to as 'underslung'. This fitment is adequate for many general laboratory applications.

The base of the sink slopes to a hole rebated to accept a waste fitting. Sinks can also be drilled to accept an overflow fitting. Simmons can supply sinks complete with a waste and overflow if requested.

O V E R H A N G S I N K S
Sink Code	Type	Length	Width	Depth	Flange	Int Radius	Outlet
		A	B	C	D	R	Position
SES2	Sink	160	160	150	28	20	Centre
SVS3	Sink	250	200	150	28	20	Centre
SDS5	Sink	300	200	185	31	30	Side
SQ6	Sink	300	300	200	35	25	Rear
SS7	Sink	350	300	150	30	30	Side
SS6	Sink	350	300	200	30	30	Side
SKL7	Sink	380	350	200	31	25	Rear
SN9	Sink	400	300	200	34	30	Side
SM8	Sink	450	365	200	35	30	Rear
SR12	Sink	550	365	235	35	30	Rear
SGL10	Sink	400	400	300	31	30	Rear
SGR11	Sink	500	400	290	35	30	Rear
SPL14*	Sink	610	406	203	30	30	Centre
SEL16*	Sink	600	450	300	31	30	Rear
SC8-C	Circular	300dia.	n/a	290	30	n/a	Centre
STB9	Trough	500	200	150	34	25	End
STM13	Trough	1490	155	115	18	35	End
STL15	Trough	<2400	150	35	28	Square	Any
Please note that all sink sizes are nominal Outlet position assumes sink is oriented with the longest side facing the user * Due to its considerable weight and capacity this sink must be provided with additional support to its underside when fitted.